Analisis Keselamatan dan Kesehatan Kerja (K3) pada Proyek Otomatisasi Mesin Vacum Pan di Pabrik Gula
DOI:
https://doi.org/10.55606/jurritek.v5i1.7200Keywords:
Industrial Automation, K3 Risk Analysis, Personal Protective Equipment (PPE), Sugar Factory, Vacuum PanAbstract
This research analyzes the implementation of Occupational Safety and Health (K3/OSH) in the automation project of the Vacuum Pan machine at a sugar factory in Indonesia. The Vacuum Pan machine automation project poses high potential hazards due to its involvement with electrical systems, high-pressure pipes, and the installation of electrical and automatic control systems. The research methods used were daily direct observation in the field and interviews with the factory's safety (EHS) personnel, project workers, and interns for one month, from July 7 to August 8, 2025. The results show that K3 planning, such as the availability of HIRADC documents, SOPs, Safety Plans, and K3 facilities (APAR, evacuation routes, safety signs), has been well-implemented and adheres to applicable standards. K3 supervision activities include Safety Inspection (routine twice a week), Safety Patrol (daily and spontaneous), and Safety Talk or Toolbox Meeting (routine every Wednesday). However, the aspect requiring improvement is worker discipline, particularly in the use of Personal Protective Equipment (PPE) and adherence to Standard Operating Procedures (SOPs), which were recorded at compliance frequencies of 65% and 60%, respectively. Workers' response to hazardous situations was also found to be less responsive (50%). In conclusion, while K3 planning and facilities are adequate, the overall K3 implementation needs to be optimized through increased supervision and the establishment of a disciplined culture regarding PPE and SOPs.
Downloads
References
Ahmad, T. L., Fitria, H., & Hakim, C. B. (2022). The influence of work safety culture and work safety monitoring system on work safety. Journal of Industrial Engineering and Halal Industries, 3(1), 57-63. https://doi.org/10.14421/jiehis.3486
Arana-Landín, G., Laskurain-Iturbe, I., Iturrate, M., & Landeta-Manzano, B. (2023). Assessing the influence of industry 4.0 technologies on occupational health and safety. Heliyon, 9(3). https://doi.org/10.1016/j.heliyon.2023.e13720
Bispo, L. G. M., & Amaral, F. G. (2024). The impact of Industry 4.0 on occupational health and safety: A systematic literature review. Journal of Safety Research, 90, 254-271. https://doi.org/10.1016/j.jsr.2024.04.009
BPJS Ketenagakerjaan. (2023). Laporan Tahunan 2022: Program Jaminan Kecelakaan Kerja (JKK). Jakarta: BPJS Ketenagakerjaan.
de Morais Gonzales, P. E., de Souza Peloso Jr, M. A., Olivo, J. E., & Andrade, C. M. G. (2020). Fed-Batch Sucrose Crystallization Model for the B Massecuite Vacuum Pan, Solution by Deterministic and Heuristic Methods. Processes, 8(9). https://doi.org/10.3390/pr8091145
Dede, D., & Winarno, W. (2021). Mengukur Potensi Bahaya dan Resiko Kecelakaan Kerja dengan Metode Hazard and Operabillity Study pada Aktivitas Maintenance. J. Sist. Tek. Ind, 23(2), 121-131. https://doi.org/10.32734/jsti.v23i2.6202
Driscoll, T., Turner, M. C., Villeneuve, P. J., Scheepers, P. T., Schlünssen, V., Cao, B., ... & Pega, F. (2025). The WHO/ILO Joint Estimates approach to occupational risk factor and burden of disease estimation: providing actionable evidence with impact across sectors in countries. Annals of Work Exposures and Health, 69(3), 337-343. https://doi.org/10.1093/annweh/wxae107
Hassanain, M. A., Al-Harogi, M., & Ibrahim, A. M. (2022). Fire safety risk assessment of workplace facilities: a case study. Frontiers in Built Environment, 8, 861662. https://doi.org/10.3389/fbuil.2022.861662
Kementerian Ketenagakerjaan Republik Indonesia. (2018). Peraturan Menteri Ketenagakerjaan No. 5 Tahun 2018 tentang Keselamatan dan Kesehatan Kerja Lingkungan Kerja.
Lin, P., Zeng, N., Li, Q., & Nübel, K. (2025). A Review of Human-Robot Collaboration Safety in Construction. Systems, 13(10), 856. https://doi.org/10.3390/systems13100856
Nasution, M. I., Handayani, Y., & Rojak, O. B. (2024, October). HUBUNGAN UNSAFE ACTION DENGAN KECELAKAAN KERJA DI PT X MANUFACTURE MESIN DIESEL, MUARABUNGO-SUMATERA. In Proceedings of the Indonesian Conference on Occupational Safety, Health, and Environment (INCOSHET) (pp. 10-19).
Nawi, M. N. M., Zainol, N. A., Naim, F., Mamat, M. N., Hamzah, N. A., & Nawi, M. N. M. (2022). Employers' perceptions of the manufacturing industry on workplace safety culture. Journal of Energy and Safety Technology (JEST), 5(2), 78-86. https://doi.org/10.11113/jest.v5n2.123
Podrecca, M., Molinaro, M., Sartor, M., & Orzes, G. (2024). The impact of ISO 45001 on firms' performance: An empirical analysis. Corporate social responsibility and environmental management, 31(5), 4581-4595. https://doi.org/10.1002/csr.2782
Putra, F. E., Ramadan, T., Akbar, S. F., Ambarwati, T., Jaelani, M. I., & Hendri, A. M. (2025). Manajemen Keselamatan dan Kesehatan Kerja (K3) untuk Mengurangi Risiko Industri dan Dampak Asbes pada Pekerja. JURAL RISET RUMPUN ILMU TEKNIK, 4(1), 60-66. https://doi.org/10.55606/jurritek.v4i1.4487
Schoberer, D., Osmancevic, S., Reiter, L., Thonhofer, N., & Hoedl, M. (2022). Rapid review and meta-analysis of the effectiveness of personal protective equipment for healthcare workers during the COVID-19 pandemic. Public Health in Practice, 4, 100280. https://doi.org/10.1016/j.puhip.2022.100280
Semenov, E. V., Slavyanskiy, A. A., Mitroshina, D. P., & Lebedeva, N. N. (2022). Thermodynamic factor and vacuum crystallization. Foods and Raw Materials, 10(2), 304-309. https://doi.org/10.21603/2308-4057-2022-2-542
Suryani, D., & Lestari, N. (2022). Analisis Perilaku Pekerja terhadap Kepatuhan K3 di Industri Manufaktur. Jurnal Keselamatan dan Kesehatan Kerja Indonesia, 9(1), 45-54.
Undang-Undang Nomor 1 Tahun 1970 tentang Keselamatan Kerja.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 JURNAL RISET RUMPUN ILMU TEKNIK
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
_001.jpg)
