Penerapan Behavior Based Safety (BBS) dalam Meningkatkan Kepatuhan Kerja di PT. XYZ
DOI:
https://doi.org/10.55606/jurritek.v4i2.5531Keywords:
Behaviour Based Safety, APD, SOP, Hazards, K3Abstract
This study evaluates the implementation of Behavior Based Safety (BBS) in improving occupational safety compliance at PT Wichindo Pratama, a heavy equipment manufacturing company with high work risks. The topic was chosen due to frequent violations of safety procedures, such as the improper use of Personal Protective Equipment (PPE) and neglect of Standard Operating Procedures (SOP), which increase the risk of accidents. A qualitative method was used through direct observation, in-depth interviews with 12 shift workers, and field assessments of safety facilities. The findings show that although the company has an Occupational Health and Safety (OHS) management system, non-compliance still occurs. Issues include incomplete PPE usage, disorganized work tools, and unsafe rest habits. Observations revealed potential hazards such as physical (noise), chemical (oil exposure), ergonomic (awkward postures), mechanical (machine use without full PPE), biological, and psychological risks (stress from shift work). BBS is seen as a strategy to connect existing OHS policies with safe work behavior by focusing on mindset and daily habits. The implementation of BBS is expected to reduce accidents and support the creation of a safer, more sustainable workplace.
Downloads
References
Aristriyana, A., & Ferdian, R. (2020). Analisis Keselamatan Kerja Menggunakan Metode Job Safety Analysis (JSA) di CV. XYZ. Jurnal Ilmiah Ganec Swara, 14(2), 152–160.
Azhari, M., Putri, L., & Yusuf, R. (2018). Pengaruh Intensitas Pencahayaan terhadap Kelelahan Visual pada Pekerja Produksi. Jurnal Kesehatan Lingkungan Indonesia, 17(2), 89–96.
Badan Standardisasi Nasional. (2004). SNI 16-7064-2004: Pencahayaan pada tempat kerja. Jakarta: BSN.
Fakhriyanto, R., Lestari, D., & Purnomo, E. (2024). Evaluasi Kombinasi Proteksi Aktif dan Pasif dalam Pencegahan Kebakaran. Jurnal Proteksi Industri, 8(2), 88–96.
Fitriyana, E., & Haryadi, T. (2021). Hubungan Jam Kerja dan Kelelahan terhadap Risiko Kecelakaan Kerja di Pekerja Industri. Jurnal Ilmiah Kesehatan Kerja, 9(1), 45–52.
Geller, E. S. (2001). The Psychology of Safety Handbook. CRC Press.
Hareendran, A., Kumari, P., & Narayan, D. (2024). Behavior-Based Safety Implementation in Industrial Workplaces: A Meta Review. Journal of Safety Research, 76(2), 98–110.
International Labour Organization. (2022). Managing Psychosocial Risks at Work. Geneva: ILO Publications.
Irwansyah, R., & Widanarko, B. (2024). Penerapan Behavior-Based Safety dan Kepatuhan Karyawan terhadap Prosedur K3. Jurnal Kesehatan Kerja Indonesia, 13(1), 55–62.
Kementerian Ketenagakerjaan RI. (2018). Peraturan Menteri Ketenagakerjaan Republik Indonesia Nomor 5 Tahun 2018 tentang Keselamatan dan Kesehatan Kerja Lingkungan Kerja.
Niciejewska, M., et al. (2020). The Importance of Behavioral Safety Approaches in Modifying Unsafe Acts in the Workplace. Safety Science, 124, 104604.
Nugroho, D., & Pambudi, Y. A. (2020). Hierarki Pengendalian Bahaya dalam Industri Manufaktur: Kajian Penerapan dan Evaluasi Efektivitas. Jurnal Teknik Industri, 21(2), 135–145.
Ratnayanti, S., Nugroho, D., & Fatimah, R. (2019). Efektivitas Sistem Proteksi Kebakaran di Industri Manufaktur. Jurnal Teknik Keselamatan, 11(1), 22–30.
Zuraida, N., Iskandar, R., & Maulida, N. (2019). Penerapan 5S dalam Meningkatkan Kinerja Keselamatan Kerja di Industri. Jurnal Teknik Industri, 15(1), 25–32.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 JURAL RISET RUMPUN ILMU TEKNIK
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
_001.jpg)
