Penerapan Sistem BIM dengan Autodesk Revit dalam Perhitungan Volume Pekerjaan pada Proyek Gedung Laboratorium Fakultas Teknik Universitas Tanjungpura

Abstract

Work volume calculations are essential for project cost estimation. Many projects, such as the Laboratory Building of the Faculty Engineering at Tanjungpura University, calculate work volumes conventionally. Conventional calculation considered less efficient and prone to errors. Building Information Modeling (BIM) provides a solution that produces more accurate and efficient calculations than conventional methods. This research aims to compare structural work volume results produced by BIM using Autodesk Revit against conventional methods and project’s BOQ. This research also describes the benefits and challenges of BIM implementation based on the researcher’s experience applying BIM with Autodesk Revit in work volume calculation. The comparison between BIM and conventional method shows a maximum difference of 2% across all work items. Meanwhile, the comparison between BIM and the BOQ shows significant differences: 81% in column formwork area, 24% in grade beam/beam concrete volume, 25% in column reinforcement weight, 25% in steel beam weight, and 10% in the steel plate weight. This research proves that BIM implementation produces more accurate and efficient calculations and serves as an effective BOQ cross-check tool. Based on the researcher’s experience in implementing BIM with Autodesk Revit, challenges found in procurement aspects, modeling aspects, and model dependency on reference drawings.