Pengaruh Kecepatan Mata Pisau dan Jumlah Bahan Terhadap Waktu Produksi Cabai Bubuk Pada Mesin Disc Mill FFC15
DOI:
https://doi.org/10.55606/jurritek.v5i1.7820Keywords:
Blade Speed, Chili Powder, Disc Mill, Material Mass, Production TimeAbstract
One of the most profitable horticultural crops, but it spoils quickly due to its high water content. Processing chili peppers with a disc mill into chili powder is a great way to increase the added value of the product while extending its shelf life. The purpose of this study was to determine how the blade rotation speed and amount of material affected the production time of chili powder in an FFC15 Disc Mill. The blade rotation speed varied between 2100 rpm and 3500 rpm, and the amount of material varied between 5% and 500 g. The data were analyzed using statistical analysis to determine the effect of each component and their relationship with each other. The results showed that the blade rotation speed and the amount of material had a significant effect on the production time of chili powder. However, the relationship between these two factors did not have a significant effect. The best operating conditions were achieved with 500 grams of material and a speed of 3500 rpm, which resulted in the fastest production time of 4.367 minutes.
Downloads
References
Efendi, A., & Suhartono, R. (2018). Perbaikan dan pemeliharaan mesin disc mill bongkol jagung. Jurnal Rekayasa Mesin, 13(3), 97–104. https://doi.org/10.32497/rm.v13i3.1281
Gaga, Y., Botutihe, S., & Haluti, S. (2019). Rancang bangun alat penggilingan cabai menggunakan motor listrik. Jurnal Teknologi Pertanian Gorontalo (JTPG), 4(2), 71–77. https://doi.org/10.30869/jtpg.v4i2.464
Hisbullah, N., Setiawan, R., Hanifi, R., & Teguh, D. (n.d.). Analisis ketahanan V-belt pada perancangan mesin disc mill (mesin penepung). Jurnal Ilmiah Wahana Pendidikan. https://doi.org/10.5281/zenodo.7676865
Idrus, M. I., & Karim, A. (2021). Pengantar statistika.
Inchi, P., Raswindo, A., & Faoji, A. (2000). No title. 71, 1–9.
Karakteristik alat penepung disc mill FFC-XX untuk penepungan tongkol jagung kering. (2017). E-Jurnal.
Lubis, M. I. A., & Andasuryani, A. (2022). Uji teknis pengecilan partikel gula tebu menggunakan disk mill tipe FFC-15. Jurnal Keteknikan Pertanian. https://doi.org/10.19028/jtep.011.2.138-152
Marpaung, F. W., Awnillah, N. T., Wiranda, S., & Yulistira, Y. (2023). Perancangan mesin penggiling dan pengering cabai dengan metode brainstorming. TALENTA Conference Series: Energy & Engineering, 6(1). https://doi.org/10.32734/ee.v6i1.1945
Kharisma, N. (n.d.). The effect of different rotational speed (RPM) disc mill toward the uniformity index of brown sugar. Jurnal Teknik Pertanian Lampung. https://doi.org/10.23960/jtep-l.v3i3.%25p
Oktavitasari, D., Saepudin, A., & Sukirman, M. (2024). Rancang bangun mesin penggiling cabai kapasitas 30 kg/jam. 2(2), 2964–5352.
Purwanto, A., & Handoko, A. W. (2023). Rancang bangun mesin penggiling jagung. IMDeC, 7–12. https://publikasi.atmi.ac.id/index.php/imdecatmi/article/view/281
Setyono, B., & Alamsyah, O. R. (2023). Uji pengaruh flywheel pada performa mesin penggiling cabai model disk mill penggerak motor listrik 1 HP. Prosiding SENASTITAN, 3, 1–8. https://ejournal.itats.ac.id/senastitan/article/view/4319
Singal, H. M., Kalesaran, L., & Tooy, D. (2025). Kajian performa dan analisis laba rugi usaha jasa mesin penggiling tepung beras tipe disc mill FFC-15 di Desa Tempok Kabupaten Minahasa. COCOS. https://doi.org/10.35791/cocos.v17i2.59959
Siskandar, R., Kusumah, B. R., & Astuti, L. C. (2024). Performance analysis of disc mill type FFC-15 grinder for making charcoal husk flour. Jurnal Teknik Pertanian Lampung, 13(4), 1121–1131. https://doi.org/10.23960/jtep-l.v13i4.1121-1131
Suherman, & Yusrianti. (2023). Penyuluhan cabai bubuk sebagai produk skala rumah tangga. Community Care, 1(1), 21–25.
Supratno, Y. H., Murtono, Mochamad, W., Tulak, T., Fatriyadi, R., Wardi, Y., … Dublin, C. (2021). No title. Journal of Physical Therapy Science, 9(1), 17–23. https://doi.org/10.1016/j.neuropsychologia.2015.07.010
Sutejo, A., Putra, R. A., Ramdani, G., & Putri, A. D. (2025). Uji performansi mesin penggiling tipe disc mill untuk penepungan porang. Jurnal Agricultural Biosystem Engineering, 4(2), 101–116. https://doi.org/10.23960/jabe.v4i2.10905
Tandijo, F., & Tobing, S. (2021). Rancang bangun mesin penggiling cabai. Cylinder: Jurnal Ilmiah Teknik Mesin, 7(1), 7–12.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2026 JURAL RISET RUMPUN ILMU TEKNIK
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
_001.jpg)
