Studi Proses Produksi Tinta Gravure Violet dengan Parameter Capaian Warna
DOI:
https://doi.org/10.55606/jurritek.v4i2.5572Keywords:
Aging Grinding, Color, Grinding Time, Gravure Ink, Transition GlassAbstract
The production process is a crucial aspect in ink formulation, especially violet spot color inks for gravure printing applications, which cannot be accurately reproduced through conventional process printing systems (CMYK). This research aims to optimize the production parameters of violet gravure inks that often exhibit color instability due to delays in the grinding and adjusting stages. The main focus of this research is to analyze the effect of variations in grinding duration, post-grinding aging time, and the amount of raw material on ink color yield, which is evaluated based on density, CIE Lab*, and ΔE parameters. The methodology used was a descriptive experiment on a laboratory scale. The results showed that the optimal treatment combination of grinding for 90 minutes, aging for 48 hours, and the use of 400 grams of material (P3K2L4) produced the highest density value (1.858) and ΔE (0.572), indicating color stability despite quantity variations. This finding indicates that optimization of grinding and aging time contributes to the improvement of pigment dispersion homogeneity and thermal stability of the resin, even without direct measurement of the transition glass temperature (Tg) value.
Downloads
References
Badgujar, N. P., Kulkarni, R. D., Deshpande, T., Arumugam, N., & Nagaraj, K. (2024). Insights into phthalocyanine blue pigment dispersion: Modeling particle size distribution and grinding rate constants. Journal of the Indian Chemical Society, 101(11), 101428. https://doi.org/10.1016/j.jics.2024.101428
Chung, R., Fedorovskaya, E., Hunter, D., & Urbain, P. (2017). Predicting color image match. In Vol. 2017-March (pp. 132–142).
Durmus, D. (2020). CIELAB color space boundaries under theoretical spectra and 99 test color samples. Color Research & Application, 45(5), 796–802. https://doi.org/10.1002/col.22521
Fidan, M. (2022). Accelerated aging effects on color change, translucency parameter, and surface hardness of resin composites (K. Michalakis, Ed.). BioMed Research International, 2022(1), 6468281. https://doi.org/10.1155/2022/6468281
Guo, D., Li, J., Shao, Y., Wang, L., He, G., Wu, L., & Qi, D. (2025). Shorter-process low-carbon cleaner digital ink-jet printing of polyester-cotton blend fabric using self-cured core-shell color microsphere with high dyes content. Progress in Organic Coatings, 203, 109185. https://doi.org/10.1016/j.porgcoat.2025.109185
Güven, G., Ulusoy, U., Burat, F., Mojtahedi, B., & Bayar, G. (2025). Time-dependent tap density modeling of graphite milled by vibrating disc mill. Minerals, 15(4), 403. https://doi.org/10.3390/min15040403
Hai, J. P., Guo, L. H., Qi, Y. Y., & Liu, G. D. (2023). Research on the spectral prediction model of gravure spot color scale based on density. Guang Pu Xue Yu Guang Pu Fen Xi/Spectroscopy and Spectral Analysis, 43(1), 31–36. https://doi.org/10.3964/j.issn.1000-0593(2023)01-0031-06
Haider, S. M., Hussain, A., Abbas, M., Khan, S. A., & Sarfraz, S. (2024). Analysis of the surface quality and temperature in grinding of acrylic-based resin. Journal of Manufacturing and Materials Processing, 8(4), 139. https://doi.org/10.3390/jmmp8040139
Hakeim, O. A., Arafa, A. A., Zahran, M. K., & Abdou, L. A. W. (2018). Characterisation and application of pigmented UV-curable inkjet inks. Pigment & Resin Technology, 47(2), 164–172. https://doi.org/10.1108/PRT-11-2016-0099
Havenko, S., Czubak, J., Labetska, M., Kochubei, V., & Lviv Polytechnic National University. (2024). Study of quality indicators of gravure imprints obtained with fluorescent ink. Journal of Graphic Engineering and Design, 15(3), 31–41. https://doi.org/10.24867/JGED-2024-3-031
Hegyháti, M., Bakon, K. A., & Holczinger, T. (2023). Optimization with uncertainties: A scheduling example. Central European Journal of Operations Research, 31(4), 1239–1263. https://doi.org/10.1007/s10100-023-00854-4
Hou, Q., Liang, M., Wang, Z., Liu, R., & Li, L. (2018). The effect of grinding conditions on disperse particle size of ultrafine organic pigment water-based dispersion system. In Applied Sciences in Graphic Communication and Packaging (Vol. 477, pp. 731–736). Springer Singapore.
Izzo, F. C., Balliana, E., Perra, E., & Zendri, E. (2020). Accelerated ageing procedures to assess the stability of an unconventional acrylic-wax polymeric emulsion for contemporary art. Polymers, 12(9), 1925. https://doi.org/10.3390/polym12091925
Lee, S. G., Kim, S., & Lee, H. L. (2020). Effect of the glass-transition temperature of latexes on drying-stress development of latex films and inkjet coating layers. Nordic Pulp & Paper Research Journal, 35(4), 660–669. https://doi.org/10.1515/npprj-2020-0052
Li, H., & Xiao, R. (2021). Glass transition behavior of wet polymers. Materials, 14(4), 730. https://doi.org/10.3390/ma14040730
Li, Y., Gu, W., & He, B. (2013). Relationship between binder content and ink absorption of coated paper. In Vol. 650 (pp. 206–210).
Liu, J., Xue, P., Yan, X., Qi, N., Chen, Z., Wang, Z., & Li, N. (2025). In situ monitoring of nonlinear physical aging and anti-aging in polymer-based separation membranes. Journal of Membrane Science, 727, 124054. https://doi.org/10.1016/j.memsci.2025.124054
Liu, T., & Chen, G. (2018). A color prediction model for halftone print based on light scattering effect. In Applied Sciences in Graphic Communication and Packaging (Vol. 477, pp. 103–109). Springer Singapore.
Lu, Q., Chen, Y., & Zhang, X. (2024). Grinding process optimization considering carbon emissions, cost and time based on an improved dung beetle algorithm. Computers & Industrial Engineering, 197, 110600. https://doi.org/10.1016/j.cie.2024.110600
Ma, J., Wu, W., Ke, Z., Li, H., Luo, J., Yang, J., & Liu, G. X. (2022). Viscosity master curves and predictions of phenolic resin solutions through early aging. Polymer, 261, 125405. https://doi.org/10.1016/j.polymer.2022.125405
Maier, J. T., Heuer, T., Nyhuis, P., & Schmidt, M. (2021). The effects of hybrid order processing strategies on economic and logistic objectives. Procedia CIRP, 96, 266–271. https://doi.org/10.1016/j.procir.2021.01.085
Milinković, B., Stančić, M., Majnarić, I., Blaznik, B., & Urbas, R. (2025). Influence of aging process on UV inkjet black printed PVC foil. Journal of Chemical Technology and Metallurgy, 60(3), 521–530. https://doi.org/10.59957/jctm.v60.i3.2025.18
Panich, W., Nak-on, S., Sabaijai, M., Raksaman, A., Puttharugsa, C., Tejangkura, T., & Chontananarth, T. (2024). Evaluation of semi-quantitative colorimetric assays based on loop-mediated isothermal amplification indicators by using image analysis. Analytical Biochemistry, 688, 115481. https://doi.org/10.1016/j.ab.2024.115481
Prasetyo, K. E., & Putrawan, I. D. G. A. (2020). Comparative study of grinding machines processes on laboratory scale and production scale in the printing ink industry. CHEMICA: Jurnal Teknik Kimia, 7(1), 1. https://doi.org/10.26555/chemica.v7i1.13369
Proskuriakov, N. E., Yakovlev, B. S., & Arkhangelskaia, N. N. (2021). Features of the CIE76, CIE-94, and CIE-2000 methods that affect the quality of the determining process of the image average color. Journal of Physics: Conference Series, 1791(1), 012107. https://doi.org/10.1088/1742-6596/1791/1/012107
Qu, T., Nan, G., Ouyang, Y., Bieketuerxun, B., Yan, X., Qi, Y., & Zhang, Y. (2023). Structure–property relationship, glass transition, and crystallization behaviors of conjugated polymers. Polymers, 15(21), 4268. https://doi.org/10.3390/polym15214268
Sönmez, S., & Özden, Ö. (2019). The influence of pigment proportions and calendering of coated paperboards on dot gain. Bulgarian Chemical Communications, 51(2), 212–218. https://doi.org/10.34049/bcc.51.2.4853
Verkhola, M., Panovyk, U., Kalytka, M., & Babych, O. (2021). Modeling and analysis of the ink splitting factors influence on ink filling in offset printing. Journal of Print and Media Technology Research, 10(4), 215–229. https://doi.org/10.14622/JPMTR-2113
Wang, L., & Zheng, Y. (2021). The impact of artificial aging on the color stability and hardness of nanocomposite resin. Frontiers in Materials, 8, 722131. https://doi.org/10.3389/fmats.2021.722131
Wang, R., Li, M., Tian, A., Wang, C., & Fu, S. (2021). Relationship between disperse yellow 6GSL crystal form and thermal stability of its dispersions. Fangzhi Xuebao/Journal of Textile Research, 42(5), 96–102. https://doi.org/10.13475/j.fzxb.20200707107
Xu, Z., Wang, Q., & Fan, H. (2023). Changes in color and iron ions of commercial iron gall inks after artificial aging. Heritage Science, 11(1), 96. https://doi.org/10.1186/s40494-023-00943-2
Zehra, Z., & Bashir, M. N. (2019). Color fastness grading system for textile industry using CIELab color space. In 2019 4th MEC International Conference on Big Data and Smart City (ICBDSC) (pp. 1–5). Muscat, Oman: IEEE.
Zhang, C., Wang, L., Yu, M., Qu, L., Men, Y., & Zhang, X. (2018). Surface processing and ageing behavior of silk fabrics treated with atmospheric-pressure plasma for pigment-based ink-jet printing. Applied Surface Science, 434, 198–203. https://doi.org/10.1016/j.apsusc.2017.10.178
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 JURAL RISET RUMPUN ILMU TEKNIK
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
_001.jpg)
