Analisis Penyebab Cacat Pada Kemasan Di Perusahaan Farmasi
DOI:
https://doi.org/10.55606/jurritek.v3i1.2232Keywords:
Fishbone Diagram, Pareto, Waste,.Abstract
With the increasing era of globalization today, competition in the industrial sector is becoming increasingly fierce and competitive. With the development of modern technology for the better but on the other hand raises problems for the environment. Every business actor who wants to win the competition must pay full attention to the quality of the products or services produced, at a low cost, the right time and quantity, and safe conditions. This study aims to analyze and reduce waste of packaging waste at PT XYZ, a manufacturing company engaged in the manufacture of medicines and vaccines. In the last 7 months, there were 1,906 pcs of defective packaging out of a total of 204,940 pcs used. The defects were caused by mold, misprinted information, faded colors, and lack of glue on the packaging. The methods used in this research are Pareto diagram and fishbone diagram. Pareto diagrams are used to identify dominant product defects, while fishbone diagrams are used to identify the causes of defects. It is expected that the results of this research can help PT XYZ reduce packaging waste and improve the quality of their products. By reducing packaging waste, PT XYZ can also contribute to reducing negative impacts on the environment.
References
Aristriyana, Eka, and Rizki Ahmad Fauzi. 2022. “Analisis Penyebab Kecacatan Produk Dengan Metode Fishbone Diagram Dan Failure Mode Effect Analysis (Fmea) Pada Perusahaan Elang Mas Sindang Kasih Ciamis.” Jurnal Industri Galuh 4(2):75–85.
Dwi Aulia, Augustine, and Zulkarnain. 2022. “Analisis Produk Reject Terhadap Pengendalian Kualitas Pada Proses Percetakan Kemasan Karton Di Pt Prima Honeycomb International.” Prosiding Seminar Nasional Tetamekraf 1(2):254–63.
Harada S, Yoston, Marno, and aa Santosa. 2022. “Mempelajari Proses Produksi Checking Fixture (CF) Panel Unit Dengan Studi Kasus Di. Fadira Teknik.” Jurnal Ilmiah Wahana Pendidikan 8(2):84–89. doi: 10.5281/zenodo.6020361.
Kusuma Dewi, Shanty. 2018. “Analisis Waste Pada Proses Produksi Dengan Lean Production.” Seminar Nasional Teknologi Dan Rekayasa (SENTRA)2018 100–105.
Mukhtar, Syukrianti, and Muchammad Nurif. 2015. “Peranan Packaging Dalam Meningkatkan Hasil Produksi Terhadap Konsumen.” Jurnal Sosial Humaniora 8(2):181–91.
Saori, Sopyan, Sela Anjelia, Risma Melati, M. Nuralamsyah, Emillio Sanggara Djorghi, and Anbia Ulhaq. 2021. “Analisis Pengendalian Mutu Pada Industri Lilin (Studi Kasus Pada Pd.Ikram Nusa Persada Kota Sukabumi).” Jurnal Inovasi Penelitian 1(10):2133–38.
Yudha Irawan Siregar, Aulia, Dinda Nursal, Putri Fakhriyyah, and Rahmadani Fitri. 2023. “Identifikasi Keanekaragaman Jamur Makroskopis Di Daerah Lubuk, Koto Tangah, Kota Padang.” Prosiding SEMNAS BIO 2023 UIN Raden Fatah Palembang.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2023 Angga Kurniawan, Moch Malgi Alpariz Kadarisman, Eki Yudhistira , Muchammad Fauzi
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
