Penerapan Model Pembelajaran Problem Based Learning pada Kompetensi Sistem Pengapian untuk Meningkatkan Hasil Belajar Siswa SMKN 1 Katapang
DOI:
https://doi.org/10.55606/jurritek.v5i1.8108Keywords:
Automotive Learning, Ignition System, Learning Outcomes, Problem Based Learning, Vocational High SchoolAbstract
This study aims to determine the effect of implementing the Problem-Based Learning (PBL) model on student learning outcomes in the Ignition System competency at SMKN 1 Katapang. The background of this study stems from the low understanding of students regarding the ignition system material due to the dominant use of the Teacher-Centered Learning (TCL) model, which tends to make students passive and only memorize concepts without understanding the overall working process. PBL is considered more relevant because it emphasizes real problem-solving, critical thinking, collaboration, and analysis according to constructivist theory. The method used is a quasi-experiment with a Nonequivalent Control Group Design. The research subjects consist of two classes of 11th-grade Light Vehicle Engineering students: an experimental group using the PBL model and a control group using TCL, with a total population of 70 students. Data collection was done through pretests and posttests using a validated multiple-choice objective test instrument. Data analysis includes comparing the learning outcome improvements of both groups to determine the effectiveness of PBL. The results show a more significant improvement in learning outcomes in the class using the PBL model compared to the TCL class. This proves that the implementation of PBL is effective in improving analysis skills and diagnostic skills in the ignition system. Therefore, PBL is recommended as a more suitable teaching model for practice-based subjects in vocational schools, especially in automotive electrical competencies.
Downloads
References
Ahmad, Y. P., & Grummy, W. A. (2023). Pengembangan media pembelajaran trainer sistem pengapian CDI sepeda motor pada kompetensi dasar memperbaiki sistem pengapian di sepeda motor. JPTM: Jurnal Pendidikan Teknik Mesin, 12(1), 70-77.
Ali, S. (2020). Penerapan model pembelajaran PJBL (Project Based Learning) pada kompetensi perbaikan sistem pengapian elektronik untuk meningkatkan hasil belajar siswa XI TBSM di SMKN 1 Mejayan tahun pelajaran 2018/2019. Islamic Education Journal, 1(2), 98.
Ardhiansyah. (2019). Penerapan model pembelajaran problem based learning untuk meningkatkan prestasi belajar siswa pada mata pelajaran kelistrikan otomotif kelas XI jurusan TKR di SMK Negeri 2 Pangkep (Tesis, Universitas Negeri Makassar). Repository UNM.
Asrini. (2021). Strategi peningkatan kualitas proses pembelajaran melalui model problem based instruction. JBIC: Jurnal Bina Ilmu Cendekia, 2(2), 142-143. https://doi.org/10.46838/jbic.v2i2.114
Astuti, R., Pranowo, S., & Sugiarto. (2022). Sistem pengapian otomotif modern. Yogyakarta: Andi.
Bakhtiar, S. H., Joko, S., Bayu, A., & Sonafi, M. A. (2023). Peningkatan kompetensi dasar memahami prinsip kerja sistem pengapian elektronik sepeda motor dengan model problem based learning berbantuan media trainer. JOVEAT: Journal of Vocational Education and Automotive Technology, 5(1), 15. https://doi.org/10.31331/joveat.v5i1.2603
Chaniago, Y., & Dafit, F. (2024). Pengaruh model pembelajaran project based learning (PJBL) terhadap motivasi serta hasil belajar Bahasa Indonesia siswa kelas V sekolah dasar. Didaktika: Jurnal Kependidikan, 13(2), 1435–1444. https://doi.org/10.58230/27454312.610
Creswell, J. W. (2015). Educational research: Planning, conducting, and evaluating quantitative and qualitative research (5th ed.). Pearson Education.
Fitri, L. Z., & Fitri, H. (2024). Indikator keberhasilan dalam evaluasi program pendidikan. Edu Cendikia: Jurnal Ilmiah Kependidikan, 4(3), 1052. https://doi.org/10.47709/educendikia.v4i03.5049
Fitriyani, W. (2020). Penerapan problem based learning dalam meningkatkan kemampuan berpikir kritis. Jurnal Pendidikan Teknologi Kejuruan, 9(2), 77–84.
Harefa, E., Afendi, A. R., Karuru, P., Sulaeman, & Wote, A. Y. V. (2024). Teori belajar dan pembelajaran.
Lexi, J. A. (2024). Model-model pembelajaran dalam dunia pendidikan.
Mila, A. A., Bambang, E. H., & Endang, S. M. (2024). Penggunaan model problem based learning (PBL) dengan media Scratch: Pengaruhnya terhadap hasil belajar. Konfrensi Ilmiah Dasar: Jurnal Prosiding Konfrensi Dasar, 5(1), 1193.
Muthmainnah Asmal. (2023). Perbandingan model pembelajaran problem based learning dan discovery learning terhadap hasil belajar siswa. Journal of Education, 5(2), 2023. https://doi.org/10.31004/joe.v5i2.1287
Neni, S., & Sunarti. (2020). Efektivitas model pembelajaran problem based learning (PBL) pada peningkatan keterampilan higher order thinking skills (HOTS). Jurnal Sosialita, 14(2), 252.
Nurhayani, & Dewi, S. (2022). Teori belajar dan perubahan perilaku.
Prasmadi, B. (2019). Pengembangan modul pembelajaran trainer sistem pengapian pada siswa kelas XI teknik kendaraan ringan di SMK Negeri 1 Jabon Sidoarjo. Jurnal Pendidikan Teknik Mesin, 8(1), 2019.
Resti, A., Eko, S., & Endang, M. (2021). Problem based learning: Apa dan bagaimana. Journal for Physics Education and Applied Physics, 3(1), 28-31. https://doi.org/10.37058/diffraction.v3i1.4416
Rosyidi, M. A. (2018). Teknologi kendaraan ringan otomotif.
Salsabila, Y. R., & Muqowim, M. (2024). Korelasi antara teori belajar konstruktivisme Lev Vygotsky dengan model pembelajaran problem based learning (PBL). LEARNING: Jurnal Inovasi Penelitian Pendidikan dan Pembelajaran, 4(3), 813–827. https://doi.org/10.51878/learning.v4i3.3185
Selvi, M., Damris, M., & Upik, Y. (2020). Kajian model pembelajaran problem based learning (PBL) dalam pembelajaran di sekolah. BIOEDUSAINS: Jurnal Pendidikan Biologi dan Sains, 3(2), 195–204. https://doi.org/10.31539/bioedusains.v3i2.1849
Sugiyono. (2016). Metode penelitian kuantitatif, kualitatif, dan R&D. Alfabeta.
Sutanto, & Hadi. (2023). Efisiensi pembakaran berdasarkan waktu pengapian optimal. Jurnal Teknologi Mesin, 18(2), 87–94. https://doi.org/10.24843/jtm.2023.v18.i2.p2
Thofiq, R., Yohanes, S., & Nuraedhy, A. (2019). Optimalisasi kompetensi sistem pengapian sepeda motor melalui metode problem based learning dengan trainer pengapian. JOVEAT: Journal of Vocational Education and Automotive Technology, 1(3), 66.
Wahab, G., & Rosnawati. (2021). Teori-teori belajar dan pembelajaran. In Paper Knowledge. Toward a Media History of Documents (Vol. 3, Issue April).
Widoyoko, E. P. (2014). Teknik penyusunan instrumen penilaian.
Yulianto, & Ramadhan. (2024). Diagnosis sistem pengapian berbasis sensor crankshaft pada mobil injeksi. Jurnal Inovasi Teknik Otomotif, 12(1), 22–31. https://doi.org/10.32585/jito.v12i1.405
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2026 JURAL RISET RUMPUN ILMU TEKNIK
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
_001.jpg)
