Vawt Helix Turbine Design For Microhybrid Plants
DOI:
https://doi.org/10.55606/jurritek.v3i2.7295Keywords:
Design VAWT Helix, Microhybrid Power Plants, Qblade, Solar Panel, Wind TurbineAbstract
Conventional power plants that exist today can cause environmental damage, such as air pollution and the erosion of fossil reserves. Therefore, humans continue to innovate to develop environmentally friendly power plants. One of them is the combined wind turbine and solar cell technology to create a more effective solution called a Hybrid power plant. This research proposes a VAWT Helix Turbine Design for Microhybrid Power Plant. The design is according to the wind speed and solar radiation for the Madiun city area. BMKG data shows that the average wind speed is 3 m/s to 7 m/s. Meanwhile, the sun's heat is on average 25°C to 36°C. The wind turbine uses 3 blades of helix type and the solar cell used is Monocrystalline. The design was designed using the AutoCAD program and simulated using Qblade software. The blades are made using 3D Printing Polylactic Acid (PLA) and then printed using a 3D Printer. Simulation results using Qblade show the average value when the wind speed is 3 m/s produces an average power within 11.4 Watt. When the wind speed is 4 m/s, the average power is 33.7 Watt. When the wind speed of 5 m/s produces an average power of 80.2 watts.
Downloads
References
Abusannuga, H., et al. (2021). Advances in Science, Technology and Engineering Systems Journal, 6(4), 292–297. https://doi.org/10.25046/aj060432
Agung, A. D. S., & Rumakso, H. P. (2021). Uji coba performa bentuk airfoil menggunakan software QBlade terhadap turbin angin tipe sumbu horizontal. Jurnal Teknik Mesin, 10(1). https://doi.org/10.22441/jtm.v10i1.10212
Alaskari, M., Abdullah, O., & Majeed, M. H. (2019). Analysis of wind turbine using QBlade software. International Conference on Sustainable Engineering Techniques (ICSET). https://doi.org/10.1088/1757-899X/518/3/032020
Ali, S., Islam, M., Mohiuddin, A. K. M., & Idres, M. (2019). Performance analysis of a small capacity horizontal axis wind turbine using QBlade. International Journal of Recent Technology and Engineering, 7(6S).
Artono, B., Ferdiana Kusuma, S., Wahyudi, R., & Ali, M. R. (2023). Innovation in product design 3D smart panel. Jurnal Industri Kreatif dan Informatika Series (JIKIS), 3(1).
Artono, B., Winarno, B., & Hidayatullah, N. A. (2019). Rancang bangun smart plug untuk sistem monitoring dan proteksi hubung singkat listrik. Jurnal ELTIKOM, 3(2), 77–84. https://doi.org/10.31961/eltikom.v3i2.123
Artono, B., Yudhoyono, K. A., Haryo, R. J. K., & Lestariningsih, T. (2023). Smart solar tracker and energy control based on Internet of Things (IoT). Telematika, 16(1), 36–47. https://doi.org/10.35671/telematika.v16i1.2576
Indriani, A., Manurung, G., Daratha, N., & Hendra. (2019). Perancangan turbin sumbu horizontal dan sumbu vertikal untuk pembangkit listrik tenaga angin (Studi kasus di Kota Bengkulu). Jurnal Amplifier, 9(2). https://doi.org/10.33369/jamplifier.v9i2.15376
Jayabalan, K., Ellappan, S., & Kumar, A. (2019). Additive manufacturing of a Gorlov helical type vertical axis wind turbine. International Journal of Engineering and Advanced Technology, 9, 2639–2644. https://doi.org/10.35940/ijeat.B4116.129219
Jefri Lianda, & Zulkifli. (2016). Rancang bangun Vertical Wind Axis Turbine (VWAT) dua tingkat. Seminar Nasional Teknologi Informasi, Komunikasi dan Industri (SNTIKI) 8.
Junaidin, B. (2017). Perancangan vertical axis wind turbine (VAWT) skala kecil. Jurnal Ilmiah Bidang Teknologi ANGKASA, 9(2). https://doi.org/10.28989/angkasa.v9i2.177
Junaidin, B. (2020). Design of helical-blade rotor of Vertical Axis Wind Turbine (VAWT). Prosiding Seminar Nasional Teknologi Informasi dan Kedirgantaraan—SENATIK 2020, 6. https://doi.org/10.28989/senatik.v6i0.439
Kulshrestha, A., Mahela, O., Gupta, M., Gupta, N., Patel, N., Senjyu, T., Danish, M., & Khosravy, M. (2020). A hybrid fault recognition algorithm using Stockwell transform and Wigner distribution function for power system network with solar energy penetration. Energies, 13(14), 3519. https://doi.org/10.3390/en13143519
Laksono, K. T. A., & Artono, B. (2023). Rancang bangun portable micro hydro dengan Pelton turbine. JEECAE (Journal of Electrical, Electronics, Control, and Automotive Engineering), 8(1), 29–34. https://doi.org/10.32486/jeecae.v8i1.614
Lubis, S., Djamil, S., & Yolanda, Y. (2016). Pengaruh orientasi objek pada proses 3D printing bahan polymer PLA dan ABS terhadap kekuatan tarik dan ketelitian dimensi produk. SINERGI, 20, 27. https://doi.org/10.22441/sinergi.2016.1.005
Priyadi, I., Surapati, A., & Putra, V. T. (2018). Rancang bangun turbin angin horizontal sebagai salah satu pembangkit daya pada mobil hybrid. Seminar Nasional Inovasi, Teknologi dan Aplikasi (SeNITiA) 2018.
Sapto, A. D., & Rumakso, H. P. (2021). —(sudah dicantumkan sebelumnya bersama Airfoil/QBlade, tidak diduplikasi)—
Wahyudi, Y., Agung, M., & Muhsin. (2021). Pengaruh distribusi tekanan terhadap gaya lift airfoil NACA 23012 pada berbagai variasi angle of attack. Jurnal Mechanical Engineering, Februari 2021.
Yandi, Y. W., & Asmar. (2021). Perbandingan efisiensi konversi energi panel surya tipe poly-crystalline dan monocrystalline berbasis Arduino di Kota Pangkalpinang. Jurnal ECOTIPE, 8(1), 47–52. https://doi.org/10.33019/jurnalecotipe.v8i1.2034
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 JURNAL RISET RUMPUN ILMU TEKNIK
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
_001.jpg)
