Implementasi Sistem Deteksi Otomatis untuk Keamanan Lift
Studi Kasus Sling Putus
DOI:
https://doi.org/10.55606/jurritek.v4i2.6067Keywords:
Automatic Detection System, Steel Sling Failure, Automatic Detection, Raspberry Pi Pico, Ultrasonic SensorAbstract
This study aims to develop an automatic detection system to improve lift safety through early detection and rapid response to sling failure. The research method uses an experimental approach by designing a 3-story lift prototype that integrates a Raspberry Pi Pico microcontroller as the main processing unit, an HC-SR04 ultrasonic sensor to detect lift position, a limit switch to detect sling failure, and a mechanical braking system using a servo motor. The system is equipped with an I2C LCD for real-time display, Telegram notifications for remote monitoring, and a buzzer alarm as an early warning. The test results show that the ultrasonic sensor has a high accuracy of 97.58% with an average error of 2.42%. The system successfully detects sling failure and activates mechanical braking automatically, preventing the basket from falling freely and allowing it to stop on the nearest floor. All control functions such as navigation buttons, motor rotation direction, and limit switch accuracy work well. This system provides an innovative solution to improve elevator safety through the integration of automatic detection technology, real-time monitoring, and direct physical response that can be applied to the development of future elevator safety technology.
Downloads
References
Akbar, M. A., Veranika, R. M., & Fauzie, M. A. (2024). Kaji ulang konstruksi elevator berkapasitas penumpang Universitas Tridinanti. [Nama Jurnal Tidak Dicantumkan], 12(1), 21–26.
Cahyani, F. N., Zulkarnain, G. P., & Anggoman, T. K. (2023). Analisis perencanaan strategi operasional lift bandara terhadap keselamatan pengunjung bandara, 1(3), 124–142.
Frima Yudha, P. S., & Sani, R. A. (2019). Implementasi sensor ultrasonik HC-SR04 sebagai sensor parkir mobil berbasis Arduino. Einstein E-Journal, 5(3). https://doi.org/10.24114/einstein.v5i3.12002
Hutajulu, R. (2021). Perancangan dan pembuatan pintu otomatis pada lemari asam menggunakan limit switch dan Arduino Mega 2560 [Skripsi, Universitas Islam Riau].
Kurniawan, R. (2008). Rekayasa rancang bangun sistem pemindahan material otomatis dengan sistem elektro-pneumatik. Jurnal Ilmiah Teknik Mesin CAKRAM, 2(1), 42–47.
Mappa, A., & Jamlean, A. (2019). Rancang bangun sistem kendali dan monitoring level, debit air dan proteksi pompa listrik. Electro Luceat, 5(1), 5–15. https://doi.org/10.32531/jelekn.v5i1.126
Marwanto, M., Suharjanto, S., & Jeniyansah, F. R. (2024). Alat pemantau kondisi pasien menggunakan Arduino Uno dengan tampilan grafik terhubung ThingSpeak. Teknika, 9(1), 59–67.
Napitupulu, B. S. H. (2024). Rancang bangun sistem peringatan kondisi darurat elevator berbasis Internet of Things di terminal bandar udara [Tugas akhir, Politeknik Penerbangan Palembang].
Nursalim, N., Sampeallo, A. S., & Sengaji, F. J. (2024). Desain dan simulasi sistem kontrol elevator 3 lantai menggunakan GMWIN. EEICT (Electric, Electronic, Instrumentation, Control, Telecommunication), 7(1).
Ooko, S. O. (2019). A comparison of Arduino, Raspberry Pi and ESP8266 boards. [Nama Publikasi Tidak Dicantumkan], (Desember), 3–5.
Priambodo, B., Nursanti, E., & Laksmana, D. I. (2021). Analisa risiko lift (elevator) dengan metode FMEA. Jurnal Teknologi dan Manajemen Industri, 7(2), 7–12.
Purwanto, H., Riyadi, M., Astuti, D. W. W., & Kusuma, I. W. A. W. (2019). Komparasi sensor ultrasonik HC-SR04 dan JSN-SR04T untuk aplikasi sistem deteksi ketinggian air. Simetris: Jurnal Teknik Mesin, Elektro dan Ilmu Komputer, 10(2), 717–724.
Salsabila, A. A. (2024). Rancang bangun kandang rehabilitasi hewan peliharaan berbasis instrumentasi pengukuran dan Internet of Things [Skripsi, Institut Teknologi Sepuluh Nopember].
Sanaris, A., & Suharjo, I. (2020). Prototype alat kendali otomatis penjemur pakaian menggunakan NodeMCU ESP32 dan Telegram Bot berbasis Internet of Things (IoT). Jurnal Prodi Sistem Informasi, (84), 17–24.
Syed, F. I., Alshamsi, M., Dahaghi, A. K., & Neghabhan, S. (2022). Artificial lift system optimization using machine learning applications. Petroleum, 8(2). https://doi.org/10.1016/j.petlm.2020.08.003
Thothadri, M. (2021). An analysis on clock speeds in Raspberry Pi Pico and Arduino Uno microcontrollers. American Journal of Engineering and Technology Management, 6(3). https://doi.org/10.11648/j.ajetm.20210603.13
Ujianto, N. T. (2023). Pintu air otomatis pencegah rob berbasis Arduino. Jurnal Engineering, 14(1), 57–64.
Xue, S., Shen, R., Shao, M., Chen, W., & Miao, R. (2019). Fatigue failure analysis of steel wire rope sling based on share-splitting slip theory. Engineering Failure Analysis, 105. https://doi.org/10.1016/j.engfailanal.2019.07.055
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 JURAL RISET RUMPUN ILMU TEKNIK
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
_001.jpg)
