Analisa Kekerasan Baja Pegas Terhadap Pengaruh Pemanasan Nyala Api
DOI:
https://doi.org/10.55606/jurritek.v3i2.5164Keywords:
Hardening, Hardness, SpringAbstract
Spring steel is one type of material that is widely used in various engineering applications, such as vehicle suspension systems and equipment that require resistance to dynamic loads. Spring steel possesses various mechanical characteristics that are strongly influenced by the microstructure of the material. These characteristics remain consistently affected throughout the entire material. Heating that occurs due to exposure to flame can alter certain microstructural properties of spring steel and affect its performance. In this study, an analysis was carried out on all changes in the microstructure of spring steel caused by flame heating, as well as its effect on the hardness of the material. The results of the study showed that heating can indeed cause changes in the microstructural phase and a decrease in fatigue resistance of the spring steel.
Downloads
References
ASM International. (1991). ASM Handbook Volume 4: Heat Treating. ASM International.
Asmara, A. B., et al. (2021). “Pengaruh Komposisi Karbon pada Baja Pegas tehadap Ketahanan Keletihan.” Jurnal Metalurgi.
Bhadeshia, H. K. D. H., & Honeycombe, R. W. K. (2011). Steels: Microstructure and Properties (3rd ed.). Butterworth-Heinemann.
Burgess, K., et al. (2017). “Struktur Mikro dan Sifat Mekanik Baja Pegas yang Diperlakukan dengan Nyala Api.” Jurnal Material Science.
Callister, W. D., & Rethwisch, D. G. (2014). Materials Science and Engineering: An Introduction (9th ed.). Wiley.
Davis, J. R. (Ed.). (2001). Alloying: Understanding the Basics. ASM International.
Duarte, M. S., et al (2018). “Effect of Heat Treatment on the Microstructure and Mechanical Properties of Springs.” Journal of Materials Engineering.
Henandez, L., et al. (2018). “Pemanasan Baja Pegas dengan Nyala Api: Studi Kasus pada Transformasi Mikrostruktur.” Internasional Jurnal of Materials Processing.
Kondoh, K., et al. (2016). “Rekrystallisasi dan Transformasi Fase pada Baja Pegas yang Dikenakan Pemanasan.” Materials Science Forum.
Kurniawan., et al. (2021). “Analisa Rekondisi Baja Pegas Daun Bekas SUP 9A dengan Metode Quench Temper pada Temperatur Tempering 460°C terhadap Kekerasan dan Kekuatan Tarik.”
Li, J., & Zhang, W. (2017). "Effect of Flame Hardening on Surface Properties of Medium Carbon Steels." Procedia Engineering, 207, 1564–1570. https://doi.org/10.1016/j.proeng.2017.10.1177
Oberg, E., Jones, F. D., Horton, H. L., & Ryffel, H. H. (2008). Machinery's Handbook (28th ed.). Industrial Press Inc.
Su, C., et al. (2021). “Pengaruh Pemanasan Cepat pada Baja Pegas terhadap Sifat Mekanik.” Journal of Heat Treatment.
Totten, G. E., & Howes, M. A. H. (1997). Steel Heat Treatment Handbook. CRC Press.
Widodo et al. (2020). “Perbandingan Induction Hardening dengan Flame Hardening pada Sifat Fisik Baja ST 60.”
Zhang, Y., et al. (2019). “Pemanasan Baja Pegas untuk Meningkatkan Ketahanan Keletihan.” Journal of Engineering Material.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 JURAL RISET RUMPUN ILMU TEKNIK
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
_001.jpg)
