Peningkatan Efisiensi Sel Surya Perovskite melalui Optimasi Rasio Komposisi rGO dan Polimer Co-Additive

Authors

  • Rahma Yuniza Putri Universitas Negeri Padang
  • Rahmat Hidayat Universitas Negeri Padang
  • Yahdi Bin Rus Universitas Negeri Padang
  • Maria Ulfa Universitas Negeri Padang

DOI:

https://doi.org/10.55606/jurrimipa.v5i2.9814

Keywords:

Co-Additive, CsPbBr3, Polyethylene Glycol, Reduced Graphene Oxide, Sel Surya Perovskite

Abstract

This research investigates the optimization of perovskite solar cells (PSCs) based on  by engineering the active layer interface using a binary composite of Reduced Graphene Oxide (rGO) and Polyethylene Glycol (PEG) polymer co-additive. The background of this study addresses the low long-term stability and high charge recombination challenges in PSCs despite their high potential as a next-generation photovoltaic technology. The fabrication method involved sequential solution deposition steps on Fluorine-doped Tin Oxide (FTO) substrates, with rGO:PEG weight ratios varied at 2:1, 1:1, and 1:2. Photovoltaic testing under a sun simulator revealed that interface modification significantly boosts efficiency compared to the pristine control device. The experimental findings demonstrate that the balanced ratio of rGO:PEG (1:1) achieves the peak Power Conversion Efficiency (PCE) of 5.43%, driven by a massive surge in short-circuit current density () to 9.78 . This study implies that precision stoichiometric control of rGO-polymer co-additives provides a powerful synergistic strategy to enhance charge extraction and maximize the performance of inorganic perovskite solar cells.

Downloads

Download data is not yet available.

References

Cao, Y., Wu, D., Zhu, P., Shan, D., Zeng, X., & Xu, J. (2020). Down-Shifting and Anti-Reflection E ff ect of CsPbBr 3 Quantum Dots / Multicrystalline Silicon Hybrid Structures for Enhanced Photovoltaic Properties.

Grosu, Y., Anagnostopoulos, A., Elena, M., Ding, Y., & Faik, A. (2020). Solar Energy Materials and Solar Cells Inhibiting hot corrosion of molten Li 2 CO 3 -Na 2 CO 3 -K 2 CO 3 salt through graphitization of construction materials for concentrated solar power. Solar Energy Materials and Solar Cells, 215(May), 110650. https://doi.org/10.1016/j.solmat.2020.110650

International Energy Agency. (2023). World Energy Outlook 2023. OECD Publishing, Paris. https://www.iea.org/reports/world-energy-outlook-2023

Jeong, J., Kim, M., Seo, J., Lu, H., Ahlawat, P., Mishra, A., Yang, Y., Hope, M. A., Eickemeyer, F. T., Kim, M., Yoon, Y. J., Choi, I. W., Darwich, B. P., Choi, S. J., Jo, Y., Lee, J. H., Walker, B., Zakeeruddin, S. M., Emsley, L., … Kim, J. Y. (2021). Pseudo-halide anion engineering for. 592(April).

Kojima, A., Teshima, K., Shirai, Y., & Miyasaka, T. (2009). Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic. 6050–6051.

Li, H., He, J., Wang, X., Liu, Q., Luo, X., Wang, M., Liu, J., Liu, C., & Liu, Y. (2024). Synthesis of Size-Adjustable CsPbBr3 Perovskite Quantum Dots for Potential Photoelectric Catalysis Applications. Materials, 17(7). https://doi.org/10.3390/ma17071607

Liang, L., Zhang, Z., Song, F., Zhang, W., Li, H., Gu, J., Liu, Q., & Zhang, D. (2020). Ultralight , fl exible carbon hybrid aerogels from bacterial cellulose for strong microwave absorption. Carbon, 162, 283–291. https://doi.org/10.1016/j.carbon.2020.02.045

National Renewable Energy Laboratory (NREL). (2024). Best Research-Cell Efficiency Chart. NREL Publications. https://www.nrel.gov/pv/cell-efficiency.html

Park, N. (2014). Perovskite solar cells : an emerging photovoltaic technology. Biochemical Pharmacology, 00(00), 1–8. https://doi.org/10.1016/j.mattod.2014.07.007

Physics of Semiconductor Devices Physics of Semiconductor Devices. (n.d.).

Snaith, H. J. (2013). Perovskites : The Emergence of a New Era for Low-Cost , High-. https://doi.org/10.1021/jz4020162

Suragtkhuu, S., Tserendavag, O., Vandandoo, U., Bati, A. S. R., Bat-erdene, M., Shapter, J. G., Batmunkh, M., & Davaasambuu, S. (2020). E ffi ciency and stability enhancement of perovskite solar cells using reduced graphene oxide derived. 9133–9139. https://doi.org/10.1039/d0ra01423k

Wang, G., Dong, W., Gurung, A., Chen, K., Wu, F., He, Q., Pathak, R., & Qiao, Q. (2019). Improving photovoltaic performance of carbon-based CsPbBr 3 perovskite solar cells by interfacial engineering using P3HT interlayer. Journal of Power Sources, 432(October 2018), 48–54. https://doi.org/10.1016/j.jpowsour.2019.05.075

Zhang, M., Cui, X., Wang, Y., Wang, B., Ye, M., Wang, W., Ma, C., & Lin, Z. (2020). Nano Energy Simple route to interconnected , hierarchically structured , porous Zn 2 SnO 4 nanospheres as electron transport layer for efficient perovskite solar cells. Nano Energy, 71(February), 104620. https://doi.org/10.1016/j.nanoen.2020.104620

Zhang, W., Xu, M., Feng, Y., Mao, Z., & Yan, Z. (2024). The Effect of Procrastination on Physical Exercise among College Students—The Chain Effect of Exercise Commitment and Action Control. International Journal of Mental Health Promotion, 26(8), 611–622. https://doi.org/10.32604/ijmhp.2024.052730

Downloads

Published

2026-07-17

How to Cite

Rahma Yuniza Putri, Rahmat Hidayat, Yahdi Bin Rus, & Maria Ulfa. (2026). Peningkatan Efisiensi Sel Surya Perovskite melalui Optimasi Rasio Komposisi rGO dan Polimer Co-Additive . JURNAL RISET RUMPUN MATEMATIKA DAN ILMU PENGETAHUAN ALAM, 5(2), 111–121. https://doi.org/10.55606/jurrimipa.v5i2.9814