Pengaruh Variasi Ukuran Agregat dan Suhu Pencampuran terhadap Karakteristik Marshall Campuran Asphalt Concrete Wearing Course (AC-WC)
DOI:
https://doi.org/10.55606/jurrimipa.v5i1.8700Keywords:
AC-WC, Aggregate, Marshall Test, Mixing Temperature, StabilityAbstract
The performance of asphalt mixtures is strongly influenced by the composition of their constituent materials, particularly aggregate size and mixing temperature during production. In many tropical and subtropical regions, asphalt pavements frequently experience rutting, reduced stability, and changes in viscoelastic properties due to high environmental temperatures and heavy traffic loads. These conditions can significantly affect pavement durability, making it essential to produce asphalt mixtures that meet established technical standards. This study aims to analyze the effect of variations in aggregate size distribution and mixing temperature on the Marshall characteristics of Asphalt Concrete Wearing Course (AC-WC) mixtures. The research employs the Marshall test method to evaluate the load-bearing capacity and stability of hot asphalt mixtures and to assess their compliance with ASTM/SNI standards. The results indicate that mixtures with standard aggregate gradation achieve stability values of 985 kg at 120°C, 1055 kg at 140°C, and 1107 kg at 160°C. As mixing temperature increases, flow values decrease, while the Marshall Quotient (MQ) increases, indicating improved stiffness. Higher temperatures also enhance compaction, reducing VIM and VMA while increasing VFA. Conversely, non-standard aggregate gradations result in several parameters failing to meet ASTM/SNI requirements, confirming that standard gradation produces superior asphalt performance.
Downloads
References
Berutu, G. F., Nasjono, J. K., & Frans, J. H. (2023). Pengaruh variasi suhu pada campuran HRS-base menggunakan filler tanah putih terhadap pengujian Marshall. Jurnal Forum Teknik Sipil, 3(1), 49–55. https://doi.org/10.35508/forteks.v3i1.9781
Cheng, Y., Li, H., Li, L., Zhang, Y., Wang, H., & Bai, Y. (2019). Viscoelastic properties of asphalt mixtures with different modifiers at different temperatures based on static creep tests. Applied Sciences, 9(20), 4246. https://doi.org/10.3390/app9204246
Direktorat Jenderal Bina Marga. (2020). Spesifikasi umum bina marga 2018 untuk pekerjaan konstruksi jalan dan jembatan (Revisi 2). Ministry of Public Works and Housing.
Dotulung, V., Lalamentik, L. G. J., & Palenewan, S. C. N. (2023). Analisis variasi gradasi agregat gabungan terhadap karakteristik. TEKNO, 21(85).
Hamedi, G. H., Dehnad, M. H., & Asadi, A. H. (2025). Evaluating mechanical and thermodynamic properties of asphalt mixtures containing anti-freezing agents against low temperature cracking. Scientific Reports, 15(1), 1–29. https://doi.org/10.1038/s41598-025-11381-4
Ibrahim, Z., Said, L. B., & Alifuddin, A. (2021). Analisis Poisson ratio dan ketahanan deformasi campuran AC-WC substitusi pasir silika. Jurnal Macca. https://doi.org/10.33096/jtsm.v6i1.277
Jihad, A., & Kadir, H. (2024). Analisis pengaruh variasi ukuran butiran agregat kasar terhadap karakteristik campuran aspal beton.
Mehrara, A., & Khodaii, A. (2013). A review of state of the art on stripping phenomenon in asphalt concrete. Construction and Building Materials, 38, 423–442. https://doi.org/10.1016/j.conbuildmat.2012.08.033
Pratama, N. G., & Haratama, K. R. (2023). Studi komparasi karakteristik dan nilai daktilitas aspal modifikasi PG 70 dengan aspal Pertamina penetrasi 60/70. Jurnal Media Publikasi Terapan Transportasi, 2(2), 184–189. https://doi.org/10.26740/mitrans.v2n2.p183-189
Riski, M., Kurniasari, F. D., & Bunyamin. (2021). The effect of mixing natural aggregates with artificial aggregates on Marshall parameters. Jurnal Inotera, 6(1), 10–19. https://doi.org/10.31572/inotera.vol6.iss1.2021.id135
Sarroukh, M., Lahlou, K., & Farah, M. (2021). Effect of the bitumen type on the temperature resistance of hot mix asphalt. Materials Today: Proceedings, 45, 7428–7431. https://doi.org/10.1016/j.matpr.2021.01.683
Siahaya, J., Mulyono, A. T., & Setyawan, A. (2023). Kinerja campuran asphalt concrete-wearing course (AC-WC) terhadap karakteristik Marshall pada perkerasan jalan. Jurnal Teknik Sipil, 12(2), 85–92.
Sukirman, S. (2016). Perkerasan lentur jalan raya.
Wang, S., Yu, W., Miao, Y., & Wang, L. (2023). Review on load transfer mechanisms of asphalt mixture meso-structure. Materials, 16(3), 1280. https://doi.org/10.3390/ma16031280
Yao, H., You, Z., Li, L., Shi, X., Goh, S. W., & Mills-Beale, J. (2019). Rheological properties and modeling of asphalt binders and intermediate temperature range.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2026 JURNAL RISET RUMPUN MATEMATIKA DAN ILMU PENGETAHUAN ALAM
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
