Kajian Massa Jenis Bahan Bakar Minyak dari Pengolahan Sampah Plastik dengan Pirolisis

Authors

  • Isnaini Lilis Elviyanti Universitas ma'arif Nahdlatul Ulama Kebumen
  • Syukron Ahmad Aftah Universitas Ma'arif Nahdlatul Ulama Kebumen
  • Titi Maemunah Universitas Ma’arif Nahdlatul Ulama Kebumen
  • Dwiyono Waluyo Universitas Ma’arif Nahdlatul Ulama Kebumen
  • M. Ngabdul Kafi Universitas Ma’arif Nahdlatul Ulama Kebumen

DOI:

https://doi.org/10.55606/jurrimipa.v4i3.8474

Keywords:

Density, Fuel Oil, Plastic, Pyrolysis, Waste

Abstract

Processing plastic waste into fuel oil with pyrolysis technology. Research on plastic oil as an alternative fuel has been widely conducted. One of them is research on processing plastic bag waste into fuel oil with pyrolysis technology. In this study, a set of pyrolysis equipment was made by Lecturers and Students of UMNU Kebumen. The plastic waste used in this study was 1 kg of plastic bag. Meanwhile, the pyrolysis process used a temperature of 250oC-300oC. The fuel oil produced in the pyrolysis process of this study was approximately 400 ml. The average density of fuel oil from plastic bag waste was 0.733 gr/ml. The results of this density calculation are in the possibility of the density of gasoline, namely 0.710 gr/ml to 0.770 gr/ml. This pyrolysis process shows great potential for converting plastic waste into an environmentally friendly alternative energy source. Furthermore, the efficiency of this pyrolysis technology can be improved by adjusting the temperature and processing time, as well as by selecting a wider variety of plastic types. This technology has the potential to be applied more widely in plastic waste management within the community as a solution to reduce environmental pollution while generating renewable energy.

Downloads

Download data is not yet available.

References

Al-Salem, S. M. (2017). Recycling and recovery routes of plastic solid waste (PSW): A review. Waste Management, 2625-2643. https://doi.org/10.1016/j.wasman.2009.06.004

Amany, M. D. (2023). Pengolahan limbah plastik menjadi bahan bakar minyak dengan proses pirolisis. Prosiding SAINTEK: Sains dan Teknologi, 2(1), 1-6. https://doi.org/10.59141/comserva.v2i10.625

Arjal, T., & Rafidah. (2020). Pengolahan limbah plastik jenis Polyethylene Terephthalate (PET) dan High Density Polyethylene (HDPE) menjadi bahan bakar minyak. Vol. 20(2), 266-273. https://doi.org/10.32382/sulolipu.v2i20.1741

Bratha, R. W. K., & Putri, N. R. (2023). Inovasi teknologi pirolisis sederhana pengolah sampah plastik menjadi bahan bakar minyak (kerosene). Jurnal Studi Inovasi, 3(2), 1-6. https://doi.org/10.52000/jsi.v3i2.132

Dharma, U. S., & Irmawan. (2015). Analisa karakteristik minyak plastik hasil dua kali proses pirolisis. Jurnal Turbo. http://dx.doi.org/10.24127/trb.v4i1.645

Ismail, A. R. (2019). Pemanfaatan limbah plastik menjadi bahan bakar minyak. Sulolipu: Media Komunikasi Sivitas Akademika dan Masyarakat, 18(2), 216-223. https://doi.org/10.32382/sulolipu.v18i2.1161

Jahirul, M. I., Faisal, F., Rasul, M. G., Schaller, D., Khan, M. M. K., & Dexter, R. B. (2022). Automobile fuels (diesel and petrol) from plastic pyrolysis oil-Production and characterisation. Energy Reports, 8, 730-735. https://doi.org/10.1016/j.egyr.2022.10.218

Kusumaningsih, T. (2020). Analisis karakteristik minyak pirolisis dari limbah plastik jenis polietilena. Jurnal Teknik Kimia Indonesia, 85-91.

Lubis, D. A., Arifin, Fitrianingsih, Y., Pramadita, S., & Asbanu, G. C. (2022). Pengolahan sampah plastik HDPE (High Density Polyethylene) dan PET (Polyethylene Terephthalate) sebagai bahan bakar alternatif dengan proses pirolisis. Vol. 20(4), 735-742. https://doi.org/10.14710/jil.20.4.735-742

Marsono, Wijatmika, & Mustono, E. (2025). Analisis sifat karakteristik minyak plastik alat penangkap ikan berbahan Polyethelien (PE) dan Polyamid (PA). AURELIA JOURNAL, 7(1), 9-20.

Reksi, R., Jati, R. D., & Fitrianingsih, Y. (2021). Perbandingan kuat tekan bata plastik berjenis Polypropylene (PP), Polyethylene Terephthalate (PET), dan High Density Polyethylene (HDPE). https://doi.org/10.26418/jtllb.v9i1.46772

Sharuddin, S. D. A. (2016). A review on pyrolysis of plastic wastes. Energy Conversion and Management, 308-326. https://doi.org/10.1016/j.enconman.2016.02.037

Sumarni, & Purwanti, A. (2008). Kinetika reaksi pirolisis plastik Low Density Polyethylene (LDPE). Jurnal Teknologi, 1(2), 135-140.

Susanna. (1996). Pirolisis plastik Polyvinil Khlorida (PVC). Laporan Penelitian Laboratorium Polimer Tinggi, Jurusan Teknik Kimia, Fakultas Teknik, UGM, Yogyakarta.

Thorat, P. V., Warulkar, S., & Sathone, H. (2013). Pyrolysis of waste plastic to produce liquid hydrocarbons. Advances in Polymer Science and Technology, 3(1), 14-18.

Yanto, R. (2019). Pembuatan minyak plastik dengan metode distilasi bertingkat pada suhu 200°C (Doctoral dissertation, Universitas Muhammadiyah Metro).

Downloads

Published

2025-12-31

How to Cite

Isnaini Lilis Elviyanti, Syukron Ahmad Aftah, Titi Maemunah, Dwiyono Waluyo, & M. Ngabdul Kafi. (2025). Kajian Massa Jenis Bahan Bakar Minyak dari Pengolahan Sampah Plastik dengan Pirolisis. JURNAL RISET RUMPUN MATEMATIKA DAN ILMU PENGETAHUAN ALAM, 4(3), 551–561. https://doi.org/10.55606/jurrimipa.v4i3.8474

Issue

Vol. 4 No. 3 (2025): Desember : JURRIMIPA: Jurnal Riset Rumpun Matematika dan Ilmu Pengetahuan Alam

Section

Articles

License

Copyright (c) 2025 JURNAL RISET RUMPUN MATEMATIKA DAN ILMU PENGETAHUAN ALAM

Creative Commons License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.