Studi Observasional Identifikasi Bahaya Kesehatan Kerja pada Pekerja Pengelasan Kapal MV. KAREEM di PT. Samudra Marine Indonesia Tahun 2025
DOI:
https://doi.org/10.55606/jurrikes.v4i3.6730Keywords:
Biological Hazards, Health Disturbance Prevention, Occupational Health Hazards, Physical Risks, WeldersAbstract
Welding work on ships carries high risks of health disturbances due to exposure to heat, smoke, chemicals, and poor ergonomic work positions. This study aims to identify potential occupational health hazards among welders working on the MV KAREEM ship at PT. Samudra Marine Indonesia in 2025. The study uses a descriptive observational design with total sampling technique, involving 30 welders. Data were collected through direct observation using observation sheets and documentation in accordance with the welding SOP. The results of the study revealed five categories of health hazards. Physical hazards included excessive heat, noise, and poor lighting. Chemical hazards included welding fumes, metal dust, and toxic gases. Biological hazards arose from exposure to microorganisms in the work environment. Ergonomic hazards were related to awkward posture, prolonged static positions, and manual handling loads. Psychosocial hazards included long working hours, high workload, and conflicts among workers. The findings emphasize that welders are prone to health disturbances due to various risk factors. Preventive measures, including improving the work environment, implementing stricter safety standards, and providing occupational health education, are essential to reduce these risks.
Downloads
References
Agustiani, S. N., Sipahutar, M. K., & Noeryanto. (2025). Identifikasi bahaya dan risiko terhadap pekerjaan welding pada bottom kapal tongkang di PT. MERANTI NUSA BAHARI. 11(1), 143–149.
BPJS Ketenagakerjaan. (2024). Kecelakaan kerja makin marak dalam lima tahun terakhir. BPJS Ketenagakerjaan. https://www.bpjsketenagakerjaan.go.id/berita/28681/Kecelakaan-Kerja-Makin-Marak-dalam-Lima-Tahun-Terakhir
Cahyo, I. D. (2022). Penggunaan multi process welding machine untuk menunjang kegiatan praktikum pengelasan pada laboratorium pengelasan kapal (Welding School) Sekolah Vokasi. Jurnal Pengelolaan Laboratorium Pendidikan, 4(1), 12–18. https://doi.org/10.14710/jplp.4.1.12-18
Edigan, F., & Putra, A. (2017). Analisis risiko pekerja pengelasan terhadap kesehatan ditinjau dari ergonomi di CV Las Jasa Muda Kota Pekanbaru. 17, 46–57.
Faizah, N., Purnamawati, E., & Tranggono. (2021). Analisis risiko K3 pada kegiatan reparasi kapal dengan menggunakan metode Hazard Identification, Risk Assessment and Determining Control (HIRADC) dan metode Job Safety Analysis (JSA) pada PT. NF. Juminten, 2(5), 74–85. https://doi.org/10.33005/juminten.v2i5.316
Gusri, L., Saputra, A., Arifin, A. P., Santoso, A., Manab, A., & Pertama, E. (2024). Identifikasi bahaya dan penilaian risiko (HIRA) terhadap juru las di bengkel las CV. X, Kota Jambi. Jurnal Teknologi Lingkungan, 2(2), 69–78. https://doi.org/10.29408/jtl.v2i2.27981
International Labour Organization. (2025). Transcript of the discussion of the Reports of the Director-General and the Chairperson of the Governing Body (113th Session). International Labour Organization.
Jumadin, H., Halik, A., Hasim, M., Wabdillah, A., Husda, B. R., Irwan, M., Aqsha, I., & Ali, A. M. T. (2023). Teknik pengelasan (Pertama). Rizmedia Pustaka Indonesia.
Jumartika, S., Gafur, A., & Rahman. (2021). Analisis risiko pada pekerja pengelasan (welding) di PT. Industri Kapal Indonesia (Persero) Kota Makassar. Window of Public Health Journal, 2(2), 328–338. https://doi.org/10.33096/woph.v2i2.162
Kementerian Ketenagakerjaan Republik Indonesia. (2018). Peraturan Menteri Ketenagakerjaan Republik Indonesia Nomor 5 tentang keselamatan dan kesehatan kerja lingkungan kerja. Peraturan Menteri Ketenagakerjaan Republik Indonesia Nomor 5 Tahun 2018 tentang Keselamatan dan Kesehatan Kerja Lingkungan Kerja, 567, 1–69. https://indolabourdatabase.files.wordpress.com/2018/03/permenaker-no-8-tahun-2010-tentang-apd.pdf
Kurniawidjaja, L. M. (2012). Teori dan Aplikasi Kesehatan Kerja (Pertama). UI Publishing.
Mulyaningtyas, D., & Anwar, Y. S. (2023). Pengaruh pengalaman kerja, safety morning talk, penggunaan APD, terhadap kinerja karyawan yang dimoderasi kecelakaan kerja. Jurnal Bisnis, Manajemen, dan Ekonomi, 4(4), 375–386. https://doi.org/10.47747/jbme.v4i4.1381
Peraturan Pemerintah Republik Indonesia. (2010). Peraturan Pemerintah Republik Indonesia Nomor 20 Tahun 2010 tentang Angkutan di Perairan (Vol. 9, Issue 1, pp. 76–99).
Putra, A. I. A. A., Rusba, K., & Liku, J. E. A. (2025). Job safety analysis pada pekerjaan pengelasan di. 11(2), 231–237.
Ramli, S. (2010). Sistem Manajemen Keselamatan dan Kesehatan Kerja OHSAS 18001 (H. Djajaningrat, Ed.; Pertama). Penerbit Dian Rakyat.
Ramli, S. (2017). Manajemen Risiko dalam Perspektif K3 (H. Djajaningrat, Ed.; Pertama). Penerbit Dian Rakyat.
Triatmodjo, B. (2009). Perencanaan pelabuhan. Jurnal Sains dan Seni ITS, 6(1), 1–490. http://repositorio.unan.edu.ni/2986/1/5624.pdf%0Ahttp://fiskal.kemenkeu.go.id/ejournal%0Ahttp://dx.doi.org/10.1016/j.cirp.2016.06.001%0Ahttp://dx.doi.org/10.1016/j.powtec.2016.12.055%0Ahttps://doi.org/10.1016/j.ijfatigue.2019.02.006%0Ahttps://doi.org/10.1
Undang Undang Republik Indonesia. (2023). Analisis yuridis terhadap Undang-Undang Nomor 6 Tahun 2023 tentang Penetapan Peraturan Pemerintah Pengganti Undang-Undang Nomor 2 Tahun 2022 tentang Cipta Kerja. Vol. 9, Issue 3, 428–447. https://doi.org/10.55809/tora.v9i3.276
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 JURNAL RISET RUMPUN ILMU KESEHATAN
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
_001.jpg)
